Description
The 3/4 Convertible Jet Pump offers both performance and reliability. Built strong, the Barracuda® Jet Pump features high quality components and is specifically designed for use in either shallow well or deep well applications up to 80' depth. Pump is built strong using rugged cast iron construction for ultimate durability and performance. Dual voltage ¾ hp motor (115 or 230 volts) preset for 115 volt installs easily to most home electrical systems and features built-in thermal overload protection for safety. Jet pump includes a pre-mounted, fully adjustable pressure switch pre-set to 20/40 PSI to maintain constant pressure throughout the home. The reinforced thermoplastic impeller and diffuser are corrosion resistant and offer high performance. 1-1/4 in. NPT Suction and 1 in. NPT discharge/drive ports easily attach to new and pre-existing water lines. Pump includes three-piece ejector kit, pressure gauge and built in leveling foot. Pump is cULus listed.
Brand Name: Barracuda
Features
Rugged cast iron pump body for durability Pumps up to 12.4 gallons per minute For shallow well and deep well applications Pre-mounted, fully adjustable pressure switch pre-set to 20/40 PSI Built-in thermal overload protection for safety Reinforced thermoplastic impeller and diffuser Cast iron seal plate 1-1/4 in. NPT Suction 1 in. NPT discharge and drive ports Includes ejector kit Dual voltage motor (115 or 230 volts) preset for 115 volt Specifications
Actual Depth
16 inch
Actual Height
8 inch
Actual Width
10.75 inch
Amperage
7.8/3.9
Discharge Connection Gender
FIP
Discharge Connection Size
1 inch
Flow Rate
At 40 PSI: 9.8 gpm @ 0 ft., 8.6 gpm @ 5 ft., 7.9 gpm @ 10 ft., 7.1 gpm @ 15 ft., 6.4 gpm @ 20 ft., 5.8 gpm @ 25 ft., 5.1 gpm @ 30ft., 3.8 gpm @ 40ft., 3.1 gpm @ 50 ft., 2.3 gpm @ 60 ft., 1.4gpm @ 70ft., .07 gpm @ 80 ft.
Horsepower
0.75
Housing Material
Cast Iron
Impeller Material
Thermoplastic
Includes
Jet pump, ejector kit, pressure gauge, adjustable rear foot, owner's manual
Inlet Connection Gender
FIP
Inlet Connection Size
1.25 inch
Listing Agency Standards
cULus
Maximum Discharge Flow Rate
12.4 gallon per minute
Maximum Output Pressure
61 PSI
Number of Impellers
1
Power Cord Length
0 foot
Product Type
Well Pumps and Well Tanks
Seal Material
Nitrile Butadiene Rubber
Submersible
No
Switch Type
Pressure
Voltage
115/230
Weight
34.5 pound
Discharge Flow
At 40 PSI: 9.8 gpm @ 0 ft., 8.6 gpm @ 5 ft., 7.9 gpm @ 10 ft., 7.1 gpm @ 15 ft., 6.4 gpm @ 20 ft., 5.8 gpm @ 25 ft., 5.1 gpm @ 30ft., 3.8 gpm @ 40ft., 3.1 gpm @ 50 ft., 2.3 gpm @ 60 ft., 1.4gpm @ 70ft., .07 gpm @ 80 ft. gallon per hour
Maximum Pumping Height
80 foot
Shipping Dimensions
17.50 H x 13.00 W x 10.00 D
Shipping Weight
35.8125 lbs
0216ghbdcfvtb
If in any case, you are not satisfied with the item you received, please contact us and we will do our best to help. Please do not leave us negative or neutral feedback or open return request/case before allowing us to solve the issue.
Please note, returned products must be in unused condition, in the original packaging and contain all paperwork, a restocking fee may be applied for returns of merchandise unless the item arrives damaged or you receive the wrong item.
Unfortunately, as of August 2018 we became aware that the state of California is enforcing new "Proposition 65" rules. That means we have to certify and label anything we ship/sell to California with a Prop 65 label. This is simply not a sensible thing for us to do with SOME of our items at this time. Due to those recent laws and regulations, certain products are prohibited from being shipped to those addresses. We apologize for any inconvenience this may cause. If you would like to be sure the item can be shipped to your address, please send us a message prior to your purchase.
Returns Accepted for this item if it's within 30 Days